Dr. Galva Shine Refresher “Nickel” – For mirror-like shine in every bath
Product benefits at a glance
-
FAST & EASY – top up as soon as the shine fades
-
MAXIMUM BRILLIANCE – restores dull electrolytes for bright, even nickel layers
-
EFFICIENT – extends bath life, saves costs and reduces waste
Description
With Dr. Galva Shine Refresher „Nickel“, you can quickly bring your galvanic nickel layers back to a high gloss. The effective formula replaces depleted brighteners and auxiliaries and restores the original layer quality – ideal for DIY workshops and professional tank plating.
Application
-
Check: If the shine visibly diminishes, it’s time to refresh.
-
Dose: Add approx. 3 ml/L directly to the bath (up to 5 ml/L if needed).
-
Mix: Briefly stir or air-agitate to homogenize.
-
Plate: Continue plating immediately and enjoy the results.
Coverage
If matte spots appear on a 5 × 5 cm (0.25 dm²) test area and 3 ml/L is added, the electrolyte typically deposits glossy again for approx. 1 hour.
Tip
For consistently glossy results, check the electrolyte regularly and top up at the first signs of dullness. This extends bath life and lowers operating costs.
Choose Dr. Galva – your brand for reliable, efficient electroplating solutions.
Labelling of the mixture:
Shine refresher Nickel
(contains glutaric acid, 2-butyne-1,4-diol)
Signal word: Danger
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves and eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container to an appropriate recycling or disposal facility.
