Adjustable power supply for electroplating and much more with excellent user-friendliness. Modern switching power supply technology allows the voltage to be set and the maximum current to be limited. The values are easy to read in the illuminated display. The 3A and 5A versions comply with the IEC standard EN 61558-2-16 and are therefore also approved for e.g. schools and training workshops! Infinitely variable in the range from 0 to 30V and 0 to the maximum current according to the selection in the drop-down menu.
We recommend a power supply unit with at least 5A for electroplating, especially for bath electroplating, this gives you a buffer so that you do not immediately reach the power limit when using our high-performance electrolytes if the workpiece does get a little larger.
Features:
- two 3-digit LC-displays with backlight for voltage and current
- output continuously adjustable from 0-30 V DC and from 0-3A / 0-5A / 0-10A
- Two controls each for coarse and fine adjustment of voltage and current
- indication accuracy (voltage) ±1%, (current) ±2
- stabilised and short-circuit proof
- 4 mm safety lab jacks
- current limiting protects consumers from overloading
- safety according to EN 61558-2-16 for 3A and 5A version
- thermal protection through integrated fan
- compact design
Scope of delivery:
Power supply unit, mains cable, measuring leads red + black (length 1m), 10 crocodile clips
What power do I Need?
In this table you can see the power required for your Project.
Electrolyte |
Power supply unit output |
3A* |
5A* |
10A* |
Chromium |
0,8 |
1,3 |
2,5 |
Copper acidic |
5 |
8,5 |
17 |
Copper alkaline |
15 |
25 |
50 |
Nickel |
10 |
17 |
34 |
Zinc |
12 |
20 |
40 |
Zinc-nickel |
3,3 |
5,5 |
11 |
* - Details of the maximum area to be coated in dm² at the lowest possible current density
Product safety information
Manufacturer information:
Thomas Henning e.K.
Buschurweg 4
Rheinland-Pfalz
Kandel, Deutschland, 76870
There are no reviews yet.