Bluing Agent "Ultra-3" – Even Blackening for Steel
The Ultra-3 bluing agent provides reliable protection for steel workpieces against corrosion. One significant advantage of this bluing agent is that it can be applied at room temperature, greatly reducing the effort compared to hot bluing. You don’t need special equipment or ventilation, and working with the room-temperature solution also reduces safety risks.
During the application, a black layer forms on the workpiece, which protects it from harmful environmental influences when combined with oils. The Ultra-3 bluing agent is particularly effective on low-alloy steels, including chromium-containing variants. Additionally, you can dilute the concentrate with water up to 1:4 for structural steel without affecting the bluing quality.
Ideal for Workpieces with High Dimensional Accuracy
Many corrosion protection methods add an extra material layer to the surface, which can cause problems with tight tolerances. This is not the case with bluing.
The chemical reaction between the metal surface and the Ultra-3 bluing agent creates a protective layer that is only two microns thick. This layer protects the workpiece from corrosion without affecting its dimensional accuracy.
How to Use the Ultra-3 Bluing Agent
Ensure the solution is at room temperature to achieve optimal results. Avoid using it outdoors in cold temperatures.
-
Preparation: Dip the cleaned and degreased workpiece into the conditioner for 2-10 minutes to prepare it for bluing.
-
Bluing: Dilute the Ultra-3 bluing agent with water up to 1:4 for structural steel and immerse the workpiece in the solution. A uniform black surface will form within a few minutes.
-
Aftercare: Remove the workpiece from the solution, rinse it thoroughly with clean water, and dry it. For optimal corrosion protection, the workpiece should be treated with a suitable oil afterward. The combination of bluing and oil provides long-lasting protection.
Suitable Materials
The Ultra-3 bluing agent is ideal for iron as well as unalloyed and low-alloy steels. For alloyed steels, you should use the included conditioner for optimal preparation.
For best results, we recommend bluing steels with up to 3% chromium content. For higher alloy steels, we recommend our quick bluing agent "Ultra-5" or the brush-on bluing "Ultra-7". Note that normal bluing does not work on stainless steel (inox), as the required oxidation does not occur.
Advantages of the Ultra-3 Bluing Agent
- Application at room temperature – no heating required
- Can be diluted with water up to 1:4 for structural steel
- Flexible use in any location with appropriate temperature
- No dimensional changes to the workpiece
- Excellent corrosion protection in combination with suitable oils and greases
- Improves adhesion of lubricants
- Optimized emergency running properties for plain bearings
Package Contents:
- Ultra-3 Immersion Black Oxide
- Conditioner
Marking of the mixture:
Ultra-3 Immersion Black Oxide
(contains phosphoric acid, selenium dioxide, copper sulphate, nickel sulfate)
Signal word: Danger
H290 May be corrosive to metals.
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H400 Very toxic to aquatic life.
H411 Toxic to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P260 Do not breathe dust/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P501 Do not discard content with household waste and forward for disposal according to regional/national guidelines.
Conditioner
(contains sulphuric acid, hydrochloric acid, potassium hydrogen difluoride)
Signal word: Danger
H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P260 Do not breathe dust/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P501 Do not discard content with household waste and forward for disposal according to regional/national Guidelines.
